Resin SZUV-T1150-e phahameng ho hanyetsa mocheso
Selelekela Kakaretso
Lit?obotsi:
SZUV -T1150 ke resin e mosehla ea SL e nang le ts'ebetso e ke keng ea lekanngoa ea mocheso. E khona ho mamella mocheso o fetang 200 ℃ ka nako e khuts'oane le 120 ℃ ka nako e telele. E etselitsoe ho sebetsana le mefuta e mengata e fapaneng ea mocheso o phahameng le lits'ebetso tse mpe tsa liteko.
Likarolo Tse Tloaelehileng
Matla a Phahameng le Khanyetso e Ntle
SZUV-T1150 e khona ho emisa mongobo, metsi le li-solvents, joalo ka peterole, mokelikeli oa phetisetso, oli le pholiso. Ka ho hanyetsa mocheso o ke keng oa lekanngoa, e loketse ho phalla, HVAC, mabone, lisebelisoa, ho bōpa le lisebelisoa tsa ho hlahloba kotopo ea moea.
Haha ka Potlako 'me U Ntlafatse Kapele
Ka ho fana ka lihlahisoa tse potlakileng le likarolo tse nang le sebaka se boreleli, se bonolo ho sebetsana le sona, SZUV-T1150 e ka qeta morero oa hau ho tloha ho taka ho ea ho likarolo tsa liteko ka nako e khut?oanyane.
T?ebeliso e Tloaelehileng
-Teko ea likarolo tse ka tlas'a-hood
-Mocheso o phahameng oa RTV oa ho bōpa
-Teko ea kotopo ea moea
- Teko ea lisebelisoa tsa mabone
- Sesebelisoa sa li-autoclave tse kopaneng
- Teko ea karolo ea HVAC
- Etsa liteko tse ngata
- Litlhare tsa Orthodontics
Linyeoe tsa Kopo
Thuto
Mefuta ea matsoho
Likarolo tsa Auto
Moqapi oa Liphutheloana
Moqapi oa Lit?oant?o
Bongaka
?
| Ponahalo | t?oeu |
| Botenya | 1.13g/cm3@25 ℃ |
| Viscosity | 430~510 cps @ 27 ℃ |
| Dp | 0.155 limilimithara |
| Ec | 7.3 mJ/cm2 |
| Botenya ba lera la mohaho | 0.05 ~ 0.12mm |
?
| Tekanyo | Mokhoa oa Teko | Boleng | |
| Pheko ea kamora metsotso e 90 ea UV | UV ea metsotso e 90 + lihora tse 2@160 ℃ ka mor'a pheko ea mocheso | ||
| Hardness, Shore D | ASTM D2240 | 88 | 92 |
| Flexural modulus, Mpa | ASTM D790 | 2776-3284 | 3601-3728 |
| Flexural matla, Mpa | ASTM D790 | 63-84 | 92-105 |
| Tensile modulus, MPa | ASTM D638 | 2942-3233 | 3581-3878 |
| Matla a tsitsitseng, MPa | ASTM D638 | 60-71 | 55-65 |
| Elongation nakong ya khefu | ASTM D638 | 4-7% | 4-6% |
| Matla a amang, notched lzod, J/m | ASTM D256 | 12-23 | 11-19 |
| Mocheso oa ho kheloha mocheso, ℃ | ASTM D 648 @66PSI | 91 | 108 |
| Phetoho ea khalase, Tg, ℃ | DMA, E'peak | 120 | 132 |
| Coefficient ea katoloso ea mocheso, E6/℃ | TMA (T | 78 | 85 |
| Thermal conductivity, W/m.℃ | ? | 0.179 | ? |
| Botenya | ? | 1.26 | ? |
| Ho monya metsi | ASTM D 570-98 | 0.48% | 0.45% |
?
?
?
?
?
?
?
?
?
?
?
?
?
